RGB COB LED Strip 24V IP20 non-Waterproof 840 LEDs/m 10mm wide

RGB COB LED Strip 24V IP20 non-Waterproof 840 LEDs/m 10mm wide is a 24V DC COB (Chip on Board) LED strip designed to produce a continuous, dotless line of light. It emits RGB light. Its IP20 rating is suited to dry indoor lighting such as coving, cabinetry and joinery. It can be cut every 5cm.

• Voltage: 24V DC
• Colour: RGB
• IP rating: IP20
• Width: 10mm
• LED density: 840 LEDs/m
• Cut interval: 5cm
• Power: 18W/m

Best for: This RGB COB LED strip is suited to colour-changing feature walls, signage, media spaces and decorative outlines. Avoid if: the route is exposed to moisture or outdoor weather; choose an appropriately rated product instead.

Installation planning: Match the system to a 24V DC constant-voltage LED driver. Use a compatible controller with the correct channel type for colour selection and dimming. For a cut-to-length installation, cut only at the stated 5cm interval. Calculate driver load from 18W/m and the ordered length, then allow suitable capacity headroom.

Browse IP20 COB LED strip or compare the full COB LED strip range.

Mainland UK delivery

• Tracked delivery, including 1m profiles: £6.85 for eligible orders under £90.
• Free tracked delivery: eligible standard parcels and 1m-profile orders of £90 or more.
• DPD Next Working Day: £9.85
• Next Working Day by 12pm: £15.95
• Next Working Day by 10:30am: £18.95
• Saturday delivery: £19.85
• 2m profiles / long goods: £21.85 per consignment. This applies whenever an order contains any 2m profile: one 2m length, a 2m length mixed with 1m items, or multiple 2m lengths. The charge remains £21.85 and is not replaced by the free-delivery threshold.

Orders placed before 1pm Monday to Friday are normally despatched the same working day when stock is available and no additional cutting or preparation time is required. Timed services exclude weekends and Bank Holidays unless Saturday delivery is selected. International orders use a tracked service; the available rate is calculated at checkout.

Returns

Unused standard stock items may be returned within 15 days in their original, undamaged condition and packaging. Contact us before sending a return so the correct return route can be confirmed.

Made-to-measure, cut, mixed or otherwise personalised products cannot be cancelled or returned once preparation has started unless they are faulty. Full unused rolls and unused accessories, power supplies, controllers, drivers and profiles may be eligible for return. Modifying a product can invalidate its warranty, including removing the fitted plug from 220V/240V strip or neon flex.

Read the full shipping policy and refund policy, or contact sales@houseofleds.co.uk before ordering a made-to-measure item.