RGB LED Neon Flex 220V 240V 8x16mm IP65 Dimmable with Remote Kit
Add adjustable RGB colour to a decorative run with this 8 × 16mm neon-flex kit. The supplied controller and remote manage colour effects and brightness, and the light is supplied in the selected length with mounting clips.
Choose a listed metre length for your layout. Made-to-measure preparation must follow the one-metre cut interval. This mains-voltage kit uses its supplied plug and controller; it is not intended to be hardwired or connected to a low-voltage strip driver.
Technical details
| Light colour / finish | RGB Multicolour |
|---|---|
| Electrical supply | 220–240V AC |
| Strip / profile width | 8mm |
| Physical dimensions | 8x16mm |
| Permitted trimming interval | 1 metre |
| Chip density | 72 LEDs/m |
| Power used per metre | 14W/m |
| Maximum continuous length | 50 metres |
| Colour rendering index | >80 |
| Ingress rating | IP65 |
| Profile shape | Dome |
| Bending orientation | Horizontal Bend |
| Light spread | 120° |
| Warranty period | 1 year |
| Kit components | RGB neon flex, controller with remote, mounting clips |
| Clip quantity | One clip per metre |
| Connection requirement | Use the supplied plug; hardwiring is not supported |
| Dimming | Via the included RGB controller |
Planning your installation
The IP65 light is intended for indoors or limited, sheltered outdoor use. Its controller is not waterproof and needs dry protection. Keep the kit away from pools, bathrooms and submerged or ground-recessed locations. Seal the entry connection and end cap correctly, and never cut or handle connections while powered. Altering the kit or using it outside these conditions can invalidate the warranty.
- Brand
- ATOM LED
- Product type
- LED Neon Flex
- Colour
- RGB Multicolour
- IP rating
- IP65 Waterproof
- LEDs per metre
- 72
- Continuous run
- 50m
- Voltage
- AC 220V 240V
- Watts per metre
- 14 Watts
- Reel length
- 50m roll
- Dimensions
- 8 × 16mm (width × height)
- Width
- 8mm
- Depth
- 16mm
- Bend direction
- Horizontal Bend
- Lumens per metre
- 690 lm
- Cut interval
- 1 metre
- Operating temperature
- -30°C to 45°C
- LED type
- 5050
- Average LED life
- 30,000 hours
- Maximum continuous operating time
- 8 hours
- Minimum bend radius
- 3cm
- Shape
- Dome
- Certification
- UKCA, CE, RoHS
- Material
- PVC
- Warranty
- 1 year
- Attachment / mounting
- Clips & Profile
- Beam angle
- 120°
- CRI
- >80
Mainland UK delivery
We dispatch orders using DPD, Royal Mail and DX, depending on the parcel, delivery service and destination. Available services and charges are shown at checkout.
- Tracked delivery, including 1m profiles: £6.95 for eligible orders under £90.
- Free tracked delivery: eligible standard parcels and 1m-profile orders of £90 or more.
- DPD Next Working Day: £9.85
- Next Working Day by 12pm: £15.95
- Next Working Day by 10:30am: £18.95
- Saturday delivery: £19.85
- DX rigid-profile delivery: DX Mainland UK delivery for rigid 2-metre profiles is £19.85 per order. If an order contains any rigid profile longer than 2 metres, including 2.45-metre profiles, the charge is £34.65 per order. The single £34.65 charge applies to mixed baskets and multiple long profiles, including orders over £90. For Northern Ireland and the Republic of Ireland, orders containing rigid profiles 2 metres or longer cost £39.85 per order with DX. Available upgrades are shown at checkout. Rigid long profiles do not qualify for free delivery at the £90 threshold. Eligible bendable profiles that can be curved for dispatch retain their short-profile delivery service.
Orders placed before 1pm Monday to Friday are normally despatched the same working day when stock is available and no additional cutting or preparation time is required. Timed services exclude weekends and Bank Holidays unless Saturday delivery is selected. International orders use a tracked service; the available rate is calculated at checkout.
Returns
Unused standard stock items may be returned within 15 days in their original, undamaged condition and packaging. Contact us before sending a return so the correct return route can be confirmed.
Made-to-measure, cut, mixed or otherwise personalised products cannot be cancelled or returned once preparation has started unless they are faulty. Full unused rolls and unused accessories, power supplies, controllers, drivers and profiles may be eligible for return. Modifying a product can invalidate its warranty, including removing the fitted plug from 220V/240V strip or neon flex.
Read the full shipping policy and refund policy, or contact sales@houseofleds.co.uk before ordering a made-to-measure item.