Home » RGB Neon Flex 6x12mm 24V IP67 – Horizontal Bend
RGB silicone neon flex with a T-shaped diffuser and red, green and blue light on a dark charcoal surface
RGB neon flex with solid red illumination and matching glow on a dark charcoal surface
RGB neon flex with solid green illumination and matching glow on a dark charcoal surface
RGB neon flex with solid blue illumination and matching glow on a dark charcoal surface
RGB neon flex showing an icy cool white RGB mix with a blue tint and matching glow on a dark charcoal surface
Unlit white RGB silicone neon flex coil with four-core power cable
Close-up of the silicone connector and white cable on unlit neon flex
Solid silicone extrusion and IP67 protection of the neon flex body
Unlit neon flex end-face showing the solid silicone housing
Close-up of the white silicone neon flex body with the lighting switched off
6x12mm RGB neon flex cross-section, housing dimensions and 120 degree beam angle
24V RGB neon flex cutting diagram: 55.6mm (5.56cm) cut intervals, 8m maximum single-feed run and four-core PWM RGB connection
Horizontal bending direction with a 120mm minimum bending diameter; do not twist or bend vertically
Blue RGB neon flex recessed beneath outdoor sandstone steps in a UK cottage garden
Soft pale-yellow RGB mixed light beneath every stepped driveway wall coping
Green RGB neon flex curving horizontally beneath a garden planter coping and shining down
Blue RGB neon flex recessed beneath the roof beams of a covered UK patio
Purple RGB neon flex recessed beneath a roofed cedar garden seating structure
Icy blue-white RGB mixed light recessed underneath an outdoor timber bench
RGB silicone neon flex with a T-shaped diffuser and red, green and blue light on a dark charcoal surface
RGB neon flex with solid red illumination and matching glow on a dark charcoal surface
RGB neon flex with solid green illumination and matching glow on a dark charcoal surface
RGB neon flex with solid blue illumination and matching glow on a dark charcoal surface
RGB neon flex showing an icy cool white RGB mix with a blue tint and matching glow on a dark charcoal surface
Unlit white RGB silicone neon flex coil with four-core power cable
Close-up of the silicone connector and white cable on unlit neon flex
Solid silicone extrusion and IP67 protection of the neon flex body
Unlit neon flex end-face showing the solid silicone housing
Close-up of the white silicone neon flex body with the lighting switched off
6x12mm RGB neon flex cross-section, housing dimensions and 120 degree beam angle
24V RGB neon flex cutting diagram: 55.6mm (5.56cm) cut intervals, 8m maximum single-feed run and four-core PWM RGB connection
Horizontal bending direction with a 120mm minimum bending diameter; do not twist or bend vertically
Blue RGB neon flex recessed beneath outdoor sandstone steps in a UK cottage garden
Soft pale-yellow RGB mixed light beneath every stepped driveway wall coping
Green RGB neon flex curving horizontally beneath a garden planter coping and shining down
Blue RGB neon flex recessed beneath the roof beams of a covered UK patio
Purple RGB neon flex recessed beneath a roofed cedar garden seating structure
Icy blue-white RGB mixed light recessed underneath an outdoor timber bench

RGB Neon Flex 6x12mm 24V IP67 – Horizontal Bend

SKU: NF24-0612-RGB
  • RGB Colour Changing
  • Horizontal Bend
  • IP67 Protection
  • 4 Year Warranty
£37.85 inc. VAT
In stock
Cut to nearest cut point.

Quantity
Technical sales support Call 01952 370085 for compatibility and sizing advice.
Matched system advice We can help match the light, driver, control and installation accessories.

Colour-changing light for outdoor details

Give garden steps, decking edges and covered seating areas a smooth line of colour with House of LEDs 6x12mm RGB neon flex. Its silicone diffuser produces a continuous illuminated surface, while the horizontal bend follows curves and shaped architectural details.

Choose red, green, blue or mixed colours with a compatible PWM RGB controller. This 24V model is available in 1–8 Metre lengths, with a maximum 8 Metre run from one power feed. Use a matching 24V constant-voltage LED driver and allow suitable power capacity for the complete installation.

Plan a clean installation

Support the flex with matching clips or an aluminium mounting profile. Follow the 55.6mm cutting interval and keep bends above the 60mm minimum radius. Correctly seal cut ends and connections to maintain IP67 protection. Controllers and electrical connections should be housed appropriately for their location.

A 20cm four-core cable is included. Optional 1–5 Metre cable lengths can be selected to reach your connection point. The flex carries a four-year warranty.

Made to measure for your project

These RGB neon flex lights are custom made to each customer’s specific project requirements, with cut lengths and cable options prepared to order within the permitted cut points and maximum run length. Enter your required length using the Made to Measure option, or send House of LEDs your project measurements.

Outdoor RGB lighting ideas

Blue RGB neon flex recessed beneath outdoor sandstone steps in a UK cottage garden
Recessed blue RGB lighting beneath garden step nosings.
Purple RGB neon flex recessed beneath a roofed cedar garden seating structure
Purple RGB lighting beneath a covered garden seating area.

Illustrative installations showing selectable RGB colours.

This is standard RGB colour-changing neon flex, not digital or addressable pixel neon flex. The whole run displays one selected colour at a time. The main image shows multiple colours together to illustrate the available RGB colours; it does not show simultaneous multicolour operation. Icy cool white is created by mixing RGB and has a blue tint; there is no dedicated white LED channel.
Brand
House of LEDs
Product type
LED Neon Flex
Colour
RGB
IP rating
IP67
LEDs per metre
108
Continuous run
8 Metre (single feed)
Voltage
24V DC
Watts per metre
12.9 W/m
Reel length
1–8 Metre
Dimensions
6x12mm
Width
6mm
Bend direction
Horizontal Bend
Lumens per metre
168.83 lm/m (RGB mix)
Cut interval
55.6mm
LED type
SMD5050
Minimum bend radius
60mm
Material
Silicone
Warranty
4 Years
Attachment / mounting
Clips / aluminium profile
Beam angle
120°
Input
4-core RGB
Model
NF24-0612-RGB
Control protocol
PWM RGB, non-addressable
Cable length
20cm included; 1–5 Metre optional

Mainland UK delivery

We dispatch orders using DPD, Royal Mail and DX, depending on the parcel, delivery service and destination. Available services and charges are shown at checkout.

  • Tracked delivery, including 1m profiles: £6.95 for eligible orders under £90.
  • Free tracked delivery: eligible standard parcels and 1m-profile orders of £90 or more.
  • DPD Next Working Day: £9.85
  • Next Working Day by 12pm: £15.95
  • Next Working Day by 10:30am: £18.95
  • Saturday delivery: £19.85
  • DX rigid-profile delivery: DX Mainland UK delivery for rigid 2-metre profiles is £19.85 per order. If an order contains any rigid profile longer than 2 metres, including 2.45-metre profiles, the charge is £34.65 per order. The single £34.65 charge applies to mixed baskets and multiple long profiles, including orders over £90. For Northern Ireland and the Republic of Ireland, orders containing rigid profiles 2 metres or longer cost £39.85 per order with DX. Available upgrades are shown at checkout. Rigid long profiles do not qualify for free delivery at the £90 threshold. Eligible bendable profiles that can be curved for dispatch retain their short-profile delivery service.

Orders placed before 1pm Monday to Friday are normally despatched the same working day when stock is available and no additional cutting or preparation time is required. Timed services exclude weekends and Bank Holidays unless Saturday delivery is selected. International orders use a tracked service; the available rate is calculated at checkout.

Returns

Unused standard stock items may be returned within 15 days in their original, undamaged condition and packaging. Contact us before sending a return so the correct return route can be confirmed.

Made-to-measure, cut, mixed or otherwise personalised products cannot be cancelled or returned once preparation has started unless they are faulty. Full unused rolls and unused accessories, power supplies, controllers, drivers and profiles may be eligible for return. Modifying a product can invalidate its warranty, including removing the fitted plug from 220V/240V strip or neon flex.

Read the full shipping policy and refund policy, or contact sales@houseofleds.co.uk before ordering a made-to-measure item.