Under Cabinet SCOB LED Strip | Blue 10mm 24V IP20
-
IP20 Indoor
-
24V DC
-
10m Run
-
7 Years
Under Cabinet Blue SCOB LED Strip brings a blue accent to kitchen wall units, dry drinks cabinets and breakfast-bar joinery. Conceal it beneath the cabinet edge to outline the furniture, while separate white lights keep the worktop suitable for everyday tasks.
Special COB (SCOB) combines 2835 LEDs with a white surface for a continuous-looking line. The 10mm format can sit inside a compatible aluminium profile, with clearance needed for its connections.
Does the blue strip also produce white light?
No. This is a fixed-blue strip, not RGB, RGBW or adjustable-white lighting. Use it for decorative kitchen cabinet lighting rather than as your only food-preparation light.
Can it fit inside my existing cabinet channel?
Measure the channel's usable internal width, not just the outside size, and allow room for the 10mm tape, connectors and cable entry. Fit only in dry indoor locations. IP20 does not protect against splashes, steam or condensation.
What power supply do I need?
Choose a 24V constant-voltage driver for the 9W/m load with at least 25% additional capacity, following its loading guidance. A 5m section uses 45W, so a suitable driver rated at least 60W covers the calculated headroom. The driver is supplied separately; do not connect directly to mains.
Can I dim the blue accent?
Yes, using a compatible single-colour dimming controller and matched supply. This changes brightness, not the colour. Keep your separate white task lighting in use when preparing food.
Dimensions for cabinet fitting

Installation scenes are illustrative. Profiles, drivers and dimming controls are supplied separately.
Select a 1–10m length and suitable cable option. For an exact fit, send your cabinet measurements to ATOM LED, a UK-based bespoke-lighting provider. Custom requests are billed at the next whole metre; permitted cuts follow the 25mm (2.5cm) marks and 10m limit.
- Brand
- ATOM LED
- Product type
- SCOB LED Strip
- Colour
- Blue
- IP rating
- IP20 Non-Waterproof
- LEDs per metre
- 280 LEDs/m
- Continuous run
- 10m
- Voltage
- 24V DC
- Watts per metre
- 9 W/m
- Reel length
- 1–10m
- Dimensions
- 10mm wide; up to 10m long
- Width
- 10mm
- Lumens per metre
- Approx. 1,157 lm/m
- Cut interval
- 25mm (2.5cm)
- LED type
- SCOB LED Strip
- Warranty
- 7 Years
- Attachment / mounting
- 3M Tape
Mainland UK delivery
We dispatch orders using DPD, Royal Mail and DX, depending on the parcel, delivery service and destination. Available services and charges are shown at checkout.
- Tracked delivery, including 1m profiles: £6.95 for eligible orders under £90.
- Free tracked delivery: eligible standard parcels and 1m-profile orders of £90 or more.
- DPD Next Working Day: £9.85
- Next Working Day by 12pm: £15.95
- Next Working Day by 10:30am: £18.95
- Saturday delivery: £19.85
- DX rigid-profile delivery: DX Mainland UK delivery for rigid 2-metre profiles is £19.85 per order. If an order contains any rigid profile longer than 2 metres, including 2.45-metre profiles, the charge is £34.65 per order. The single £34.65 charge applies to mixed baskets and multiple long profiles, including orders over £90. For Northern Ireland and the Republic of Ireland, orders containing rigid profiles 2 metres or longer cost £39.85 per order with DX. Available upgrades are shown at checkout. Rigid long profiles do not qualify for free delivery at the £90 threshold. Eligible bendable profiles that can be curved for dispatch retain their short-profile delivery service.
Orders placed before 1pm Monday to Friday are normally despatched the same working day when stock is available and no additional cutting or preparation time is required. Timed services exclude weekends and Bank Holidays unless Saturday delivery is selected. International orders use a tracked service; the available rate is calculated at checkout.
Returns
Unused standard stock items may be returned within 15 days in their original, undamaged condition and packaging. Contact us before sending a return so the correct return route can be confirmed.
Made-to-measure, cut, mixed or otherwise personalised products cannot be cancelled or returned once preparation has started unless they are faulty. Full unused rolls and unused accessories, power supplies, controllers, drivers and profiles may be eligible for return. Modifying a product can invalidate its warranty, including removing the fitted plug from 220V/240V strip or neon flex.
Read the full shipping policy and refund policy, or contact sales@houseofleds.co.uk before ordering a made-to-measure item.
