Under Cabinet SCOB LED Strip | Red 10mm 24V IP20
-
IP20 Indoor
-
24V DC
-
10m Run
-
7 Years
Under Cabinet Red SCOB LED Strip creates a defined red line beneath kitchen cabinetry or along a dry dining-side counter. It is an accent for evening entertaining, used alongside white worktop lighting rather than as the only light for preparing food.
The Special COB (SCOB) design uses 2835 LEDs beneath a white surface to give a continuous-looking finish. Keep the strip recessed in a suitable profile for a neat cabinet installation.
Is this red strip colour-changing?
No. It emits fixed red light and cannot switch to white, blue or green. Choose an RGB product instead if your design needs selectable colours.
How do I fit it below a cabinet?
Check that the aluminium profile accepts a 10mm strip with room for the connections. Plan the cable route back to the power supply before fitting. IP20 is for dry indoor areas only, not places exposed to sink splashes, steam or condensation.
Can the red light be dimmed?
Use a compatible single-colour dimming controller with a matched power supply to adjust brightness. Keep separate white lighting for cooking and other tasks. Profiles and controls are not part of this strip listing.
How much driver capacity is needed?
The load is 9W/m. For 5m, 45W plus 25% headroom equals 56.25W; choose a suitable 24V constant-voltage driver rated at least 60W, subject to its loading guidance. The driver is required, supplied separately and must not be replaced by a direct mains connection.
Dimensions for cabinet fitting

Installation scenes are illustrative. Profiles, drivers and dimming controls are supplied separately.
Choose a 1–10m length, then your cable option. Ask ATOM LED about bespoke cabinet-lighting lengths. This UK-based service records your finished-length request; 2.3m is charged as 3m. Cuts follow the 25mm (2.5cm) marks and each continuous section is limited to 10m.
- Brand
- ATOM LED
- Product type
- SCOB LED Strip
- Colour
- Red
- IP rating
- IP20 Non-Waterproof
- LEDs per metre
- 280 LEDs/m
- Continuous run
- 10m
- Voltage
- 24V DC
- Watts per metre
- 9 W/m
- Reel length
- 1–10m
- Dimensions
- 10mm wide; up to 10m long
- Width
- 10mm
- Lumens per metre
- Approx. 1,157 lm/m
- Cut interval
- 25mm (2.5cm)
- LED type
- SCOB LED Strip
- Warranty
- 7 Years
- Attachment / mounting
- 3M Tape
Mainland UK delivery
We dispatch orders using DPD, Royal Mail and DX, depending on the parcel, delivery service and destination. Available services and charges are shown at checkout.
- Tracked delivery, including 1m profiles: £6.95 for eligible orders under £90.
- Free tracked delivery: eligible standard parcels and 1m-profile orders of £90 or more.
- DPD Next Working Day: £9.85
- Next Working Day by 12pm: £15.95
- Next Working Day by 10:30am: £18.95
- Saturday delivery: £19.85
- DX rigid-profile delivery: DX Mainland UK delivery for rigid 2-metre profiles is £19.85 per order. If an order contains any rigid profile longer than 2 metres, including 2.45-metre profiles, the charge is £34.65 per order. The single £34.65 charge applies to mixed baskets and multiple long profiles, including orders over £90. For Northern Ireland and the Republic of Ireland, orders containing rigid profiles 2 metres or longer cost £39.85 per order with DX. Available upgrades are shown at checkout. Rigid long profiles do not qualify for free delivery at the £90 threshold. Eligible bendable profiles that can be curved for dispatch retain their short-profile delivery service.
Orders placed before 1pm Monday to Friday are normally despatched the same working day when stock is available and no additional cutting or preparation time is required. Timed services exclude weekends and Bank Holidays unless Saturday delivery is selected. International orders use a tracked service; the available rate is calculated at checkout.
Returns
Unused standard stock items may be returned within 15 days in their original, undamaged condition and packaging. Contact us before sending a return so the correct return route can be confirmed.
Made-to-measure, cut, mixed or otherwise personalised products cannot be cancelled or returned once preparation has started unless they are faulty. Full unused rolls and unused accessories, power supplies, controllers, drivers and profiles may be eligible for return. Modifying a product can invalidate its warranty, including removing the fitted plug from 220V/240V strip or neon flex.
Read the full shipping policy and refund policy, or contact sales@houseofleds.co.uk before ordering a made-to-measure item.
