Under Shelf SCOB LED Strip | Pink 280 LEDs/m 10mm 24V IP20

Pink under shelf lighting, one fixed colour, 10mm wide, no controller needed. This SCOB strip packs 280 LEDs into every metre, so the light on the shelf below reads as one dot-free band, not a row of chips.

Cut to order from 1 to 10 metres in a single length, covering a 1.4m alcove shelf or a 6m shelving run without joins. 280 LEDs/m  ·  9W per metre  ·  24V DC  ·  IP20, indoor dry rooms only. Ten metres draws 90W in total — the figure your driver must carry.

Where does pink shelf lighting actually work?

Pink earns its place on display shelving, where the stock is the subject: retail merchandising bays, salon product walls, bedroom alcove shelving and collectors' display shelves. It works as a colour wash rather than working light, so keep a neutral white source for anything you need to read under.

• Retail and salon: a 3-metre open shelving run pulls 27W, so four bays share one modest driver.
• Bedroom and living room: pink under a floating shelf throws colour onto the wall behind — kinder at night than a ceiling fitting.
• Indoor only: IP20 means dry rooms. Keep it out of bathroom zones and porches.

Does pink LED strip need a controller?

No. This is a single fixed pink, not a colour-changing RGB strip, so there is nothing to switch between and no controller in the circuit. It needs one constant-voltage 24V driver sized roughly 20% above the load. Four metres of shelf pulls 36W, which makes a 45W driver the sensible choice.

Run the wiring in parallel back to that driver rather than shelf to shelf. To make it dimmable, dim on the 24V side rather than a mains wall dimmer — our 24V LED drivers are listed by wattage.

How do I size and cut it to my shelf?

Measure the underside of each shelf, then round down to the nearest cut mark, spaced every 25mm along this strip. Order one continuous length up to 10 metres and cut on site, or order a separate piece per shelf. Cut only on the marked pads, with the driver unplugged.

1. Unroll the full length before switching on. A strip powered while coiled builds heat, ruins the adhesive and is a fire risk.
2. Fit an aluminium profile where the shelf underside is bare metal, or insulate it first.
3. Bench-test the run before committing the adhesive. It suits kitchen open shelving too.

Call 01952 370008 or email sales@houseofleds.co.uk for a cut list, and browse the full under shelf LED strip range with free UK delivery.

Reviewed 2026 — House of LEDs, Telford, Shropshire.

Mainland UK delivery

We dispatch orders using DPD, Royal Mail and DX, depending on the parcel, delivery service and destination. Available services and charges are shown at checkout.

• Tracked delivery, including 1m profiles: £6.95 for eligible orders under £90.
• Free tracked delivery: eligible standard parcels and 1m-profile orders of £90 or more.
• DPD Next Working Day: £9.85
• Next Working Day by 12pm: £15.95
• Next Working Day by 10:30am: £18.95
• Saturday delivery: £19.85
• DX rigid-profile delivery: DX Mainland UK delivery for rigid 2-metre profiles is £19.85 per order. If an order contains any rigid profile longer than 2 metres, including 2.45-metre profiles, the charge is £34.65 per order. The single £34.65 charge applies to mixed baskets and multiple long profiles, including orders over £90. For Northern Ireland and the Republic of Ireland, orders containing rigid profiles 2 metres or longer cost £39.85 per order with DX. Available upgrades are shown at checkout. Rigid long profiles do not qualify for free delivery at the £90 threshold. Eligible bendable profiles that can be curved for dispatch retain their short-profile delivery service.

Orders placed before 1pm Monday to Friday are normally despatched the same working day when stock is available and no additional cutting or preparation time is required. Timed services exclude weekends and Bank Holidays unless Saturday delivery is selected. International orders use a tracked service; the available rate is calculated at checkout.

Returns

Unused standard stock items may be returned within 15 days in their original, undamaged condition and packaging. Contact us before sending a return so the correct return route can be confirmed.

Made-to-measure, cut, mixed or otherwise personalised products cannot be cancelled or returned once preparation has started unless they are faulty. Full unused rolls and unused accessories, power supplies, controllers, drivers and profiles may be eligible for return. Modifying a product can invalidate its warranty, including removing the fitted plug from 220V/240V strip or neon flex.

Read the full shipping policy and refund policy, or contact sales@houseofleds.co.uk before ordering a made-to-measure item.