Under Shelf SCOB LED Strip | White 272 LEDs/m 10mm 24V IP20
-
IP20 Indoor
-
24V DC
-
10m Run
-
7 Years
An under shelf LED strip should light the shelf, not your eyes. At 10mm wide this SCOB strip hides inside the front lip of a shelf underside, and 272 LEDs per metre lay a flat, dot-free wash across books, glassware and display pieces, not a row of hotspots.
Cut to order from 1 to 10 metres in five colour temperatures: 2700K and 3000K warm white for alcove shelving and bookshelves, 4000K natural white for open shelving, and 5000K or 6500K for contrast on darker objects. 24V DC · 9W per metre · IP20 indoor dry areas only.
What is SCOB, and how does it differ from standard COB on a shelf?
SCOB runs the chips in one line under a single continuous phosphor coating, so the lit face reads as one bar rather than 272 separate points. On a shelf underside the viewer sits below the strip, and that sightline is where a dotted strip gives itself away on gloss and glass.
Standard COB blends its dots; SCOB tightens that line further and holds the beam narrower, which counts on a display shelf only 200mm deep.
What does the 29.4mm cut interval mean when I size a strip to my shelf?
The strip cuts only every 29.4mm, on the marked copper pads. A 1,200mm shelving unit takes 40 segments, or 1,176mm of strip, leaving a 24mm shortfall you push into the back corner where nobody looks. Round down every time and never stretch a run to fit.
Measure the shelf underside, divide by 29.4, then drop to the whole number below. Two floating shelves of different lengths are best cut from one continuous run.
What do I need besides the strip itself?
Three things: a constant-voltage 24V driver sized roughly 20% above total load, an aluminium profile with a diffuser, and solderless connectors. Five metres draws 45W, so specify a 60W driver. Colour-changing versions need a dedicated controller rather than a wall dimmer.
- Driver headroom: a driver at full rated output runs hot and fails early. The 20% margin is cheap reliability.
- Insulation: tape fixed onto a metal shelving unit can short against the frame, so use a profile or insulating backing.
- Before powering up: unroll the whole reel, because a coiled strip traps its own heat and ruins the adhesive.
- Where it belongs: IP20 suits a bookshelf or indoor shelving unit, never a bathroom zone or outdoors.
Free UK delivery, 2026 stock cut to length in Telford, Shropshire. Call 01952 370008 or email sales@houseofleds.co.uk. Browse the under shelf range, add a slim aluminium profile, or size a 24V driver.
- Brand
- ATOM LED
- Product type
- SCOB LED Strip
- Colour
- Warm White 2700K, Warm White 3000K, Natural White 4000K, Daylight 5000K, Cool White 6500K
- IP rating
- IP20 Non-Waterproof
- LEDs per metre
- 272 LEDs/m
- Continuous run
- 10m
- Voltage
- 24V DC
- Watts per metre
- 9 W/m
- Reel length
- 1–10m
- Dimensions
- 10mm wide; up to 10m long
- Width
- 10mm
- Cut interval
- 29.4mm (2.94cm)
- LED type
- SCOB LED Strip
- Warranty
- 7 Years
- Attachment / mounting
- 3M Tape
- CRI
- >95
Mainland UK delivery
- Tracked delivery, including 1m profiles: £6.85 for eligible orders under £90.
- Free tracked delivery: eligible standard parcels and 1m-profile orders of £90 or more.
- DPD Next Working Day: £9.85
- Next Working Day by 12pm: £15.95
- Next Working Day by 10:30am: £18.95
- Saturday delivery: £19.85
- 2m profiles / long goods: £21.85 per consignment. This applies whenever an order contains any 2m profile: one 2m length, a 2m length mixed with 1m items, or multiple 2m lengths. The charge remains £21.85 and is not replaced by the free-delivery threshold.
Orders placed before 1pm Monday to Friday are normally despatched the same working day when stock is available and no additional cutting or preparation time is required. Timed services exclude weekends and Bank Holidays unless Saturday delivery is selected. International orders use a tracked service; the available rate is calculated at checkout.
Returns
Unused standard stock items may be returned within 15 days in their original, undamaged condition and packaging. Contact us before sending a return so the correct return route can be confirmed.
Made-to-measure, cut, mixed or otherwise personalised products cannot be cancelled or returned once preparation has started unless they are faulty. Full unused rolls and unused accessories, power supplies, controllers, drivers and profiles may be eligible for return. Modifying a product can invalidate its warranty, including removing the fitted plug from 220V/240V strip or neon flex.
Read the full shipping policy and refund policy, or contact sales@houseofleds.co.uk before ordering a made-to-measure item.
